Tony Leung
Designed for Site #2 in Abu Dhabi, between Saadiyat Island and Yas Island.


Design Submission for the 2010 Land Art Generator Initiative Design Competition

Artist’s descriptive text:
Concept
These inflatable ‘beach balls’ not only serve as containers for PV films but also an installation interacting with wind, topography and visitors.

Photovoltaic
When inflated, the ball is temporarily stabilized by the counterweighted bottom cap. The PV films that weaved into a stretched membrane is tilted at 25 degrees from the horizon within the stabilized section, which provides better efficiency according to the latitude angle of Dubai (25° N).

When deflated, the tile angle of PV films will be zero.

Output
Each film contains 3㎡ of PV cells film which gives a maximum output of 200W approximately.

Material
Each clear latex ‘beach ball’ measures 2m in diameter. Alternatively, ETFE foil that allows better light penetration could be tested.

Base cap
The base cap contains LED lighting, air valve and silicon cable connectors which provides flexible cable movement. Each unit is color coded to match the color cap of ‘base station’ and should be carefully weighted to offset the weight of PV films above.

Night view
At night, these ‘beach balls’ will be illuminated by LED lighting installed on each base cap, producing a moving lightscape along the highway.

Base Station
Each base station is equipped with air pump, inverter and battery.

These stainless steel units are buried 1m underground to provide anchors for five to six ‘beach balls’ and to convert electricity from DC to AC for storage or transmission to electric grid.

A 8m cable containing air and electric conduits is connected to each beach ball.

Site impact
Consider the sandy and loose soil condition, the proposal is easy to install, remove and highly expandable.

low-res version PDF of submitted boards